- 62 -Table of Setting Items in the Control Panel Menu Screenz Shaded areas are factory-set values.Item Value DescriptionTransferSettingCyan TransferSetting0+1+2+3-3-2-1Lower the setting value if lateral-stripe white dots anddark streaks appear for cyan, green and blue toner.Raise the setting value if the high-density portion ofcyan, green and blue is thinner.Magenta TransferSetting0+1+2+3-3-2-1Lower the setting value if lateral-stripe white dots anddark streaks appear for magenta and/or red toner.Raise the setting value if the high-density portion ofmagenta and/or red is thinner.Yellow TransferSetting0+1+2+3-3-2-1Lower the setting value if lateral-stripe white dots anddark streaks appear for yellow toner.Raise the setting value if the high-density portion ofyellow is thinner.Black TransferSetting0+1+2+3-3-2-1Lower the setting value if lateral-stripe white dots anddark streaks appear for black toner.Raise the setting value if the high-density portion ofblack is thinner.White TransferSetting*10+1+2+3-3-2-1Lower the setting value if lateral-stripe white dots anddark streaks appear for white toner.Raise the setting value if the high-density portion ofwhite is thinner.DV Roller Cleaning 1 OnOffAdjust the toner disposal threshold.On:Image quality priorityOff:Toner life priorityDV Roller Cleaning 2 Mode 1Mode 2OffMay be effective against lateral striping caused byvariations in ambient temperature and/or humidity. Trymode 2 if desired results are not produced by mode 1.*1: Displayed with Pro1050 only.
