Daily care > 1254. Turn the short tab (1) of the feed roller to the right and slowly push it onto the shaftof the paper tray.By aligning the slot of the feed roller with that of the shaft, push the feed rollercompletely in so that the short tab fits into the slot of the shaft.5. Push the paper tray completely into the printer.W HEN MOVING THE PRINTERCarry out the following procedure when moving the printer.WARNING!> The machine, without the optional accessories, paper trays,consumables and paper, weighs 18.8kg. When moving theequipment, make sure that there are two or more personscarrying it.> If the duplex unit or A4 universal tray (optional) has beeninstalled, uninstall it before moving the printer. If these are notfixed securely to the printer, they may fall to the ground andcause injuries.> When lifting the machine, be sure to observe the followingpoints, failure to do so may cause the machine to fall and resultin injuries.> 2 persons, one facing the front of the machine (control panel)and the other facing the back, should firmly grip the recessedareas on the bottom part of both sides of the machine. Nevertry to lift the machine by gripping any other areas.> Bend your knees to avoid possible injuries to your back.CAUTION!Do not tilt the machine more than 10 degrees.