Advanced printing > 554. Hold the grip of the paper tray and pull its extendable part to the front until itreaches its maximum.5. Squeeze the right width guide (1) and slide it to the paper width.6. Load the paper with the side to be printed facing up. Curl up the back end of thepaper so that it will not fall from the tray.7. Push the paper tray completely into the printer.MANUAL FEEDTray 1 can be used for manual feed. You must also set your Printer Properties for manualfeed. Tray 1 normally operates in multiple-purpose mode, where multiple sheets can beloaded and printed continuously. In Manual mode, you are prompted to press the Startbutton for each sheet.SELECTING NUMBER OF COPIESYou can select the number of copies to print via your Printer Properties. When selecting thenumber of copies, you should also decide if those copies are collated.COLLATING COPIESWhen printing multiple copies of a job, the output can be automatically collated. Whencopies are collated, they are printed in groups by the print job, not by the page. If you donot select the collate option, your copies will be printed by page. So, ten page number 1’swill print and then ten page number 2’s will print. Collated jobs will print all pages in sets,pages 1 through 10, until all sets have been printed.The default for Collating is On whenthere is more than one copy being printed.