Basic operations > 14D ISPLAYING OPTIONAL ACCESSORY CONFIGURATION AND PAPER TRAY SETTINGSWhen using this printer as a network printer and with SNMP protocol enabled, you candisplay on the printer driver, the optional accessory configuration and settings configuredat the control panel such as paper type or size. These settings are displayed on the Optionstab. This section explains the procedure using Windows XP as an example.1. From the Start menu, click Printers and Faxes and then display the properties ofthe printer to be used.2. Select this printer, right click and Select Properties.3. Click the Device Options tab.4. Click Get Information from Printer.5. Click OK. The contents of the Device Options tab will be updated based on the dataobtained from the printer.P RINTING PDF FILES FROM USB FLASH DRIVEYou can print PDF files (up to version 1.6) directly from a standard USB flash drive withoutany connection to a host computer. See “USB drive menu” on page 33.NOTE> When using USB or Parallel connection to this printer, this feature cannotbe used. You have to manually set the items on the printer driver.> The rear tray information cannot be obtained. You have to manually setthe item.> For paper size and paper type settings, you must configure them at thecontrol panel beforehand. Even if you change the settings here, they willnot be reflected on the printer itself.> When using this feature, you have to activate the SNMP port (default:Enable) on the printer using the control panel.> Only users with administrator’s rights can change the settings. Userswithout administrator’s rights can only check the contents.NOTEThe properties of the printer can be displayed on the printer driver.