Print media > 30LOADING ENVELOPESPlace the envelopes face up in the center of the tray as shown. Make sure to adjust theguides as needed.LABELSLabels can be printed from any tray. Use labels that were designed for use in laser printers.Insert the labels into the tray and adjust the guides to fit the sheets. Place the side to beprinted facing up and the top of the sheets to be fed into the printer first. Do not load morethan 100 label sheets in Tray 1 or more than 290 in Tray 2 – 4, and do not fill any trayabove the fill line marked inside the tray.Use the Control Panel Menu to select the Label Media Type and size for the tray in use. Thenuse your computer’s application software to print the labels.P ROHIBITED MEDIA TYPES AND CONDITIONS - USABLE PAPERUsing the following types of paper might cause paper jams, malfunctions or damage to theprinter. Do not use them.> Full-color transparencies.> Paper exclusively for ink-jet printer use> Paper that is too thick or thin> Paper that has been printed on before (including color printing)> Wrinkled, folded or torn paper> Wet paper> Curled paper> Paper with static electricity> Adhesive paper> Paper with special coatings> Treated colored paper> Paper using ink that will run at a temperature of 150°C> Thermal paper> Carbon paper> Paper with staples, paper clips, ribbons or tapeNOTEWhen setting media type from the control panel, ensure Auto-sense is set toOFF.
