Panasonic AG-DTL1E Operating Insructions

Contents

14 (E)ENGLISHPerforming initial settings1 Set the power switch to ON.2 Set the PROGRAM switch to the MENU position.The setting menu screen is shown on the TVmonitor.3 Press the PAGE (+) or PAGE (–) button to displaythe P3 RECORDING T-MODE & CAMERA screen.The flashing items are ones that can be set.Fixed at 01 C1.The cameras to be used are set here.The cameras are set in pairs: C1-C2, C3-C4 and so on up toC15-C16.“Y” (YES) is set for each pair of cameras that is to be used.A black burst signal (black screen) is recorded if no videosignals are supplied from a camera even when “Y” (YES)has been set for that camera.The number of cameras to be used isdisplayed automatically here.The recording time mode is set here.Fixed at OFF.$ Setting the recording time mode andnumber of cameras4 Follow the steps below to set the recording timemode and number of cameras.O Use the (4), (3), (2) and (1) SHIFT buttonsto move the flashing part to the item whosesetting is to be changed.O Press the (+) and (–) SET buttons to change thesetting.<2 12 16 5∫ ; 343434H H1 2•7 3•5 4•6On the P3 RECORDING T-MODE & CAMERAscreen, set the number of cameras to be used andtheir recording time modes for RT0 through RT7 inthe REC TYPE column ahead of time.Different kinds of recordings can be undertaken bysetting these two items when normal recording ortimer recording is to be performed.O For RT0, T-MODE (recording time mode) is fixedat OFF.O For RT7, the setting for the number of cameras tobe used is fixed at 1 unit for C1.