Panasonic AG-DTL1E Operating Insructions

Contents

48 (E)ENGLISHMenu page P7[TERMINAL INPUT SELECT] P7EXT TIMER IN OFFTIME ADJUST IN 9:00[TERMINAL OUTPUT SELECT]ALARM/SENSOR OUT CONTINUEERROR WARN/REC OUT WARNINGEXT TIMER OUT START 0:00END 0:00[VIDEO OUT SEQUENCE]SW INTERVAL 2sBYPASS CAMERA OFFSW NOISE CANCEL ONLL CAMERA OFF[EXT SWITCHER]MODE VIDEO OUTTERMINAL INPUT SELECT screenMenu item Description of functionEXT TIMER IN For setting whether the signals from the external timer connected tothe rear panel terminal section are to be acknowledged in theexternal timer recording mode.ON : The signals from the external timer are acknowledged.OFF : The signals from the external timer are not acknowledged.Select OFF when using an external timer which has beenconnected to the unit’s power cord.TIME ADJUST IN For setting the time to be set when signals have been input from thecomponent connected to TIME ADJ IN on the rear panel terminalsection.00:00 to 23:59, RESETFactory setting mode (9:00)OThe seconds are fixed at “00.”OWhen signals are input after RESET has been set, the minutes ofthe time are set to “00.”The minute setting is returned to “00” while it is between 0 and 15minutes when signals are input.The hour is carried up and the minutes are set to “00” while thesetting is between 45 and 59 minutes when signals are input.The underlining indicates the factory mode setting.TERMINAL OUTPUT SELECT screenMenu item Description of functionALARM/SENSOROUTFor setting how the control signals are to be output to the componentconnected to ALARM OUT on the rear panel terminal section whenalarm recording or sensor recording is performed.CONTINUE : The control signals continue to be output even afterrecording.ALARM REC : The control signals are output only during alarmrecording or sensor recording.ERROR WARN/REC OUTFor setting how the control signals are to be output to the componentconnected to WARNING/REC OUT on the rear panel terminalsection when a problem has occurred in the unit.WARNING : The control signals continue to be output.REC : The control signals are output only during recording.EXT TIMER OUT For setting the START time and END time at which the controlsignals are to be output to the component connected to EXT TIMEROUT on the rear panel terminal section.0:00—23:59The control signals are not output when the same time has been setfor both the START and END times.The underlining indicates the factory mode setting.Setting menus