Panasonic AG-DTL1E Operating Insructions

Contents

46 (E)ENGLISHMenu page P6[TAPE REMAIN] P6LEVEL OFFBUZZER OFF[REC REVIEW]AUTO OFFERROR BUZZER OFF[ERROR WARN BUZZER]MODE OFF[REC WARNING]REC LOSS BUZZER OFFTAPE REMAIN screenMenu item Description of functionLEVEL For setting at what point REMAIN is to flash on the display tube andthe remaining tape warning is to be displayed when the tape-endposition is about to be reached. (When using a 180-minute tape)The REMAIN flashing is released when any button is pressed.OFF : The remaining tape warning is not displayed.2% : The warning is displayed when the remaining tape amount isless than approximately 2%.10% : The warning is displayed when the remaining tape amount isless than approximately 10%.20% : The warning is displayed when the remaining tape amount isless than approximately 20%.30% : The warning is displayed when the remaining tape amount isless than approximately 30%.BUZZER For setting whether the buzzer is to sound when the tape-endposition is about to be reached. The buzzer is stopped when anybutton is pressed.ON : The buzzer sounds at the position which was set for theLEVEL item.OFF : The buzzer does not sound.The underlining indicates the factory mode setting.REC REVIEW screenMenu item Description of functionAUTO For setting automatic REC REVIEW.(This function plays back the recording after recording for a specifictime in order to detect whether the proper video level is beingmaintained during recording.)ON : REC REVIEW is performed automatically.If the level detected is found to be unacceptable, the tape isloaded and unloaded two times, and REC REVIEW isautomatically performed again. If it is still unacceptable evenafter this, recording is performed.OFF : REC REVIEW is not performed automatically.ERROR BUZZER For setting whether the buzzer is to sound when it is discovered byREC REVIEW that the proper video level was not maintained.ON : The buzzer sounds. It is stopped when any button is pressed.OFF : The buzzer does not sound.The underlining indicates the factory mode setting.Setting menus