4 (E)ENGLISHFeaturesBuilt-in frame switcher for supporting 16 camerasO The unit also supports asynchronous cameras.O The unit enables recording after the cameras areswitched over automatically as dictated by therecording time mode.O During recording, the cameras can be switched andtheir images viewed on a TV monitor at a time otherthan the recording timing which has been set.Digital recordings with a high picture qualityDigital recordings with a high picture quality can bemade on S-VHS tapes. The incorporation of high-performance A/D and D/A circuitry means that high-quality digital recording is possible even whenrecording after switching from one camera to another.O High picture quality mode: 520 lines for horizontalresolution, 50 dB for S/N ratioO Standard picture quality mode: 380 lines forhorizontal resolution, 50 dB for S/N ratioWide selection of recording time modesO There is a choice of 14 different recording timemodes.O It is possible to switch between frame recording andfield recording.Camera-specific playbackDuring playback, any camera can be selected and itsrecording played back. During cue or review, as well,any camera can be selected and its recording playedback.Playback with 4 pictures simultaneously shownon the screenThe pictures recorded by four of the cameras can beselected and, by dividing the TV monitor screen intofour parts, all of the four pictures can be played backat the same time on the respective parts of thescreen.Date/time search functionThe recording date and time (month / day / hours /minutes) can be selected to initiate a search of therecorded data.Alarm search functionRecorded data that includes alarm recordings can besearched.3 hours, 9 hours, 12 hours, 18 hours, 24 hours, 48 hours, 72hours, 96 hours, 120 hours, 180 hours, 240 hours, 360hours, 480 hours and 960 hoursHigh reliability and high durabilityO IQ mechanism with top-notch reliability anddurabilityO Stable tape travel achieved using a 2DD reel motorO Automatic head cleaning function for cleaning thehead cylinder each time a tape is loadedSpace-saving design with 38 cm width and verticalinstallation capabilityThe unit can be installed upright on its left-side paneland secured using the special-purpose mountingbrackets (optional accessory STEN-B6730).O Do not install the unit upright on its right-side panel.This may cause the unit to malfunction.On-screen setting functionsThe unit’s many and varied functions can be set onthe monitor screen.Other featuresO 75Ω termination ON/OFF function provided forcamera input (16) connectorsO Switching between 8 camera input connectors and8 camera loop-through outputs possibleO RS-232C control facilityO Audio recording (in the 3-hour to 24-hour timemodes)O Simple clock adjustment functionsO Recording time and operating camera settingfunctionO Diverse internal timer and external timer functions