Panasonic AG-DTL1E Operating Insructions

Contents

45 (E)Menu page P5[VTR MODE SELECT] P5(TAPE IN) STOP(TAPE END)MODE STOPALARM IN STOP(EJECT OPERATION) EJECT(VIDEO MODE) AUTO(COMB FILTER) OFFVTR MODE SELECT screenMenu item Description of function(TAPE IN) For setting the operation mode that is to be established when thecassette tape has been inserted into the unit.STOP : The unit is set to the stop mode.REC : Recording is performed.REW 5 REC: The tape is first rewound to its start, and thenrecording is performed.(TAPE END)MODEFor setting the operation mode that is to be established when thetape-end position is reached.STOP : The unit is set to the stop mode at the tape-end position.BUZZER : The unit is set to the stop mode at the tape-end position,and the buzzer sounds.REW : The tape is rewound to its start position, and then the unitis set to the stop mode.REPEAT : The tape is rewound to its start position, and recording isperformed.EJECT : The tape is ejected at the tape-end position.(TAPE END)ALARM INFor setting the operation mode that is to be established when thetape-end position is reached after alarm recording or sensorrecording has been performed.STOP : The unit is set to the stop mode at the tape-endposition.The tape is ejected when EJECT has been selected asthe (TAPE END) MODE setting.CONTINUE: The unit continues with the operation selected as the(TAPE END) MODE setting regardless of whether analarm signal is input.(EJECTOPERATION)For setting the EJECT button operation.EJECT : The tape is ejected by operating the button.REW 5 EJECT: The tape is ejected after it has been rewound to itsstart position by operating the button.(VIDEO MODE) For setting the colour of the video output signal.AUTO : The colour is automatically switched in accordance with theinput signal.B/W : The signal is forcibly set to monochrome.(COMB FILTER) For selecting the filter or filters to be used when separating thecomposite signal into its Y (luminance) and C (chrominance)components.ON : The comb filter is used to separate the composite signalinto its Y (luminance) and C (chrominance) components.OFF : The notch filter is used to separate the Y (luminance)component, and the band-pass filter is used to separate theC (chrominance) component.The underlining indicates the factory mode setting.Setting menus