Panasonic AG-DTL1E Operating Insructions

Contents

21 (E)PlaybackStill-picture playbackNormal playback1 Set the power switch to ON, and insert thecassette tape.2 Press the PLAY button to start playback.When 8 cameras are being used, the 8 cameranumbers appear on the camera number display ofthe display tube, and the number of the camerawhose pictures are being played back is enclosedin a square.4 To stop the playback, press the STOP button.<2 12 16 5∫ ; 343434H H2 41 31 Set the power switch to ON, and insert thecassette tape.2 Press the PLAY button to start playback.3 Press the PAUSE STILL button.The unit is now set to the still-picture playbackmode.(When the frame advance button is pressed in thestill-picture playback mode, the tape is played backone frame at a time.)4 Press the PLAY button again to return to normalplayback.5 To stop the playback, press the STOP button.<2 12 16 5∫ ; 343434H H2•4531CAMERA17285 6433 Press the CAMERA buttons to set the playbackcamera.Press the (+) or (–) tracking button if block-shapedvideo noise appears during playback in the 3-hourmode. The tracking information will appear on thedisplay tube while the tracking button is held down.Keep pressing the (+) or (–) tracking button until thenumber of the tracking information reaches itsmaximum.Tracking information displayIf a switch is made to cameras No.13 to 16 when atape which was frame-recorded using cameras No.13to 16 is being played back in the still-picture playbackmode, blue background signals will be output.COUNTNumber at maximum