15 (E)Performing initial settings7 Upon completion of the settings, set thePROGRAM switch to the OFF position.The setting menu screen is cleared from the TVmonitor, and the normal mode is restored.$ Setting the recording mode6 Set the recording mode by proceeding as follows.O Use the (4) and (3) SHIFT buttons to move theflashing part to the item whose setting is to bechanged.O Press the (+) and (–) SET buttons to change thesetting.5 Press the PAGE (+) or PAGE (–) button to displaythe P4 RECORDING MODE screen.The flashing items are ones that can be set.P4 RECORDING MODE screenO Either field recording or frame recording isselected for the FIELD/FRAME item setting.O Either high-quality recording or standard qualityrecording is selected for the PICTURE QUALITYitem setting.O The recording time mode which was set on the P3RECORDING T-MODE & CAMERA screen isselected for the REC-TYPE setting.When type RT0 is selected, the recording timemode which was set using the TIME MODEbutton on the front panel is used for recording.When a type from RT1 to RT7 is selected, therecording time mode which was set by RT1 toRT7 is used for recording.O When RT7 is selected for the REC-TYPE itemsetting, frame recording will be forcibly performedregardless of the FIELD/FRAME item setting.O Recording is possible at 50 fields a second (whichis the same rate as for video machines used in thehome) if NORMAL is selected as the PICTUREQUALITY item setting and the recording timemode is set to 3H when RT7 has been selectedas the REC-TYPE item setting.O If the recording time mode is set to 3H when asetting other than RT7 has been selected for theREC-TYPE item, recording will be performedautomatically in the high picture quality moderegardless of the PICTURE QUALITY itemsetting.[RECORDING MODE] P4FIELD/FRAME FIELDPICTURE QUALITY HIGHREC-TYPE RT0 ( OFF¢16)[ALARM/SENSOR REC]MODE OFFFIELD/FRAME FIELDPICTURE QUALITY HIGHDURATION 0.5minBUZZER OFFREPEAT OFFGROUP ALARM1 RT0 ( OFF¢16)GROUP ALARM2 RT0 ( OFF¢16)