Panasonic AG-DTL1E Operating Insructions

Contents

34 (E)ENGLISHUseful functions5 Use the (4) and (3) SHIFT buttons to move theflashing part to the EXT TIMER IN item, and pressthe (+) and (–) SET buttons to select ON as theitem’s setting.6 Upon completion of the settings, set thePROGRAM switch to the OFF position.The setting menu screen is cleared from the TVmonitor, and the normal mode is restored.7 Press the TIMER MODE button on the front paneland set it to the external timer recording mode (the“EXT” lamp lights on the display tube).The power is automatically turned off, and the unitwaits for the control signal to be sent from theexternal timer.O If the cassette tape has not been inserted or itsaccidental erasure prevention tab has beenbroken out, the buzzer will sound, and the EXTlamp will flash.O To release the external timer recording mode,press the TIMER MODE button to turn off theEXT lamp on the display tube.8 Set the external timer.Recording will start automatically when the unit’spower is turned on by the control signal sent fromthe external timer.When using an external timer connected to theterminal section on the unit’s rear panel (controlexercised at the EXT TIMER connector)1 Connect the external timer to the terminal sectionon the unit’s rear panel, and turn on its power.2 Set the unit’s POWER switch to ON, and insert thecassette tape.3 Set the PROGRAM switch to the MENU position.The setting menu screen now appears on the TVmonitor.4 Press the PAGE (+) or PAGE (–) button to displaythe P7 TERMINAL INPUT SELECT screen.The flashing items are ones that can be set.[TERMINAL INPUT SELECT] P7EXT TIMER IN OFFTIME ADJUST IN 9:00[TERMINAL OUTPUT SELECT]ALARM/SENSOR OUT CONTINUEERROR WARN/REC OUT WARNINGEXT TIMER OUT START 0:00END 0:00[VIDEO OUT SEQUENCE]SW INTERVAL 2sBYPASS CAMERA OFFSW NOISE CANCEL ONLL CAMERA OFF[EXT SWITCHER]MODE VIDEO OUT<2 12 16 5∫ ; 343434H HEXT3•672 4 5 “EXT” lamp