Panasonic AG-DTL1E Operating Insructions

Contents

8 (E)ENGLISHParts and their functions= PAUSE STILL buttonPress to initiate rec-pause or still-picture playback.When the unit remains in the pause or still-pictureplayback mode for more than a prescribed period oftime, it is automatically set to the stop mode inorder to protect the tape.When the PROGRAM switch is at the MENUposition, this button functions as the SHIFT (3)button to select the items on the setting menuscreen.When the PROGRAM switch is at the CLK POSposition, the button moves the screen displayposition upward.> TIME MODE buttonsPress to select the recording time mode.3H : 3-hour recording mode9H : 9-hour recording mode12H : 12-hour recording mode18H : 18-hour recording mode24H : 24-hour recording mode48H : 48-hour recording mode72H : 72-hour recording mode96H : 96-hour recording mode120H : 120-hour recording mode180H : 180-hour recording mode240H : 240-hour recording mode360H : 360-hour recording mode480H : 480-hour recording mode960H : 960-hour recording modeWhen the PROGRAM switch is at the MENUposition, these buttons function as the SET (+) and(–) buttons to select the settings for the settingmenu items.? RESET buttonPress while the counter value is shown on thedisplay tube by the COUNTER button to reset theCTL counter.When the camera number is shown on the displaytube by the COUNTER button during playback, thisbutton is used to switch the monitor screenbetween 1-screen playback and 4-screen playback.@ COUNTER buttonUsed to switch the display mode on the displaytube.Each time the COUNTER button is pressed, themode is switched as follows.Camera number display:The current camera number is displayed.CAMERA17285 6121194310Clock display:The current time is displayed.24-hour display 12-hour displayCounter display:The tape counter is displayed.Pass display:This indicates the number of times (passes) repeatrecording has been performed when repeatrecording has been set.A SEARCH buttonPress to select the search mode.Each time this button is pressed in the counterdisplay mode, the search mode is switched, andone of the following mode lamps lights on thedisplay tube:M : Memory stop modeAS : Alarm search modeWhen the SEARCH button is pressed while thetime is displayed on the display tube by theCOUNTER button, the time search mode is set,and “S” lights on the display tube.B :00 buttonPress to set the seconds digits of the time to “00.”The seconds are reset to “00” when this button ispressed while the display shows 0 to 29 seconds,and they are carried up to 1 minute and set to “00”when it is pressed while the display shows 30 to 59seconds.C PROGRAM switchUsed to display the menu and adjust the time.Keep this switch at OFF for normal operation.MENU:The setting menu screen is displayed.When the switch is set to the MENU positionwhile holding down the STOP button, the alarmscreen or power loss screen appears.CLK POS:Set the switch to this position when adjusting thetime or adjusting the screen display position.PASSCOUNTTIMETIME