Panasonic AG-DTL1E Operating Insructions

Contents

49 (E)Menu page P7[TERMINAL INPUT SELECT] P7EXT TIMER IN OFFTIME ADJUST IN 9:00[TERMINAL OUTPUT SELECT]ALARM/SENSOR OUT CONTINUEERROR WARN/REC OUT WARNINGEXT TIMER OUT START 0:00END 0:00[VIDEO OUT SEQUENCE]SW INTERVAL 2sBYPASS CAMERA OFFSW NOISE CANCEL ONLL CAMERA OFF[EXT SWITCHER]MODE VIDEO OUTVIDEO OUT SEQUENCE screenMenu item Description of functionSW INTERVAL For setting the timing at which the video signals which are suppliedfrom the camera and which are to be output from the rear panelVIDEO OUT connector are to be switched.1s (1 sec.), 1.5s (1.5 sec.), 2s (2 sec.), 2.5s (2.5 sec.), 3s (3 sec.),4s (4 sec.), 5s (5 sec.), 10s (10 sec.)BYPASS CAMERA For setting whether the video signals of a specific camera are not tobe output from the VIDEO OUT connector.OFF : The video signals of all the cameras are output.C1—C16 : The video signals of the specified camera/s are notoutput.SW NOISECANCELFor setting the processing of the black burst signal when switchingthe video signals which are output from the video signal outputconnector.ON : The black burst signal is instantly output when the video signalis switched.OFF : The black burst signal is not output when the video signal isswitched.LL CAMERA For setting the synchronization system of the connected cameras.ON : Line-lock type of camerasOFF : Internal sync and external sync type of camerasOUse of the internal sync type of cameras is recommended.OSelect the ON setting when even one line-lock type of camera isused.OSelect the ON setting when recording video signals such as VHSplayback images (TBC OFF) which contain a high level of noise.The underlining indicates the factory mode setting.EXT SWITCHER screenMenu item Description of functionMODE For switching the function of the EXT SW IN/VIDEO OUT connectoron the rear panel.VIDEO OUT : The connector is used to output the video signals.EXT SW IN : The connector is used to input the signals of theexternal sequential switcher.The underlining indicates the factory mode setting.Setting menus