Panasonic AJ-LT95 Operating Instructions Manual

Contents

Panasonic AJ-LT95 Operating Instructions Manual Manual pdf 14 page image

14AUDIO control area1 POWER switchUsed to control the unit’s power.2 AUDIO MONITOR SELECT switchesUsed to select the audio monitor output andspeaker output.O V1/V1•2/V2 switchV1: The VTR1 sound is output to the left andright channels.V1•2: The VTR1 sound is output to the leftchannel and the VTR2 sound to the rightchannel.V2: The VTR2 sound is output to the left andright channels.O L (V1) switch, R (V2) switchThe selected audio channel sound is output tothe left (or right) channel. When mixing between1 and 2, the mixed signals of channel 1 andchannel 2 are output; when mixing between 3and 4, the mixed signals of channel 3 andchannel 4 are output.3 Analog audio recording level controls andUNI/VAR switchFor each analog audio input connector (XLR) onthe rear panel there is one level control.When the UNI/VAR switch is set to VAR, the audiorecording level can be adjusted separately for eachinput channel.When it is set to UNI, the levels are fixed to theinitial values regardless of the positions of the levelcontrols.When V2 IN is selected as the setup menu itemNo.172 (VTR1 IN SEL) setting and the same soundis to be recorded on VTR1 and VTR2, the recordinglevel for both VTR1 and VTR2 is adjusted usingthese controls. (The recording level cannot beadjusted separately for VTR1 and VTR2.)Parts and their functionsAUDIO MONITOR SELECTL RCH 1413MIXANALOGMIX2UNIV2PBSDIRECVARCH 2 CH 3 CH 4CH 3 44 (V1·2)V1 V213MIXMIX2413MIXMIXASMBL V A1 A21ST EDITPREVIEWVTR 2VTR 1SPLITMARKOUTMARKINSHIFTENTERALL STOPREVIEWAUTOEDITMULTIGO TOGO TO OUTDURTOTALOUTLAST EDINLAST XEVENT7 8 94 5 61 20 C3~-+DELETESET UP F/TCDIAGLISTCORCT BSTRACKDUMPLOAD FSDISPEXIT RETURNT SETPLAYSTOPSTILL REW FFSTB OFFA3 A4 TC REC EDIT2413MIXMIX2 413MIXMIX2 413MIXMIX2SDICH 1 CH 2V2 / V1 PBRECCH 3 CH 4INTANALOGSDI1010203000INTINTANALOGSDIINTANALOGSDIV2INPUTINT0 10102030000 10102030000CH 1POWEROFFONUNIVARCH 2 CH 3 CH 4ANALOGV1/V2REC1 23