66Audio cross channel editingSound can be recorded on CH1 and CH2 channelsonly.Audio cross channel editing using the internal audiomemory can be performed by connecting an externalaudio mixer.$ Example of operationRecording cross-faded audio signals onto CH2Process 1AJ-LT95VTR1 VTR2INPUTAINPUTBMIXERCH1 OUTMIXERCH2 OUTAUDIOCH1 OUTInternalmemoryAUDIO OUT(CH1 or CH2)AUDIOCH2 INAUDIOCH1 INAudio mixerINPUTAINPUTBMIXERCH1 OUTMIXERCH2 OUTAudio mixer12 Select CH2 as the setup menu item No.318 (AUDMEM CH) setting.3 Press the A1 and A2 buttons to turn on their lamps.(CH1 and CH2 audio insert)4 Set the edit points of VTR1 and VTR2.5 Operate the audio mixer in such a way that theVTR1 output signals (which are supplied to INPUTA of the audio mixer) are output from the MIXERCH1 OUT and MIXER CH2 OUT connectors.(Turn down the input to INPUT B of the audiomixer.)6 Press the AUTO EDIT button to execute editing.The same sound (VTR1 output) is insert recordedonto CH1 and CH2 of VTR2. The same sound thatis recorded for about 20 seconds before the OUTpoint is also stored in the internal memory at thistime.INpointCH1CH2Internal memoryApprox.20 secOUTpointSelect “INT_X” as the setup menu item No.317(AUD MEM MODE) setting.“m” now appears on the superimposed display ofVTR2. (See page 85)
