Panasonic AJ-LT95 Operating Instructions Manual

Contents

Panasonic AJ-LT95 Operating Instructions Manual Manual pdf 35 page image

270The underlining indicates the factory setting.202 ID SEL00000001OTHERDVCPROThis selects the ID information to be returned to the controller.0: 20 25H (525i mode) is returned.1: The DVCPRO’s own ID and F0 33H (525i mode) is returned.This operation is not performed in the 625i mode.207 STOP BIT0000000112This selects the RS-232C (EDL) stop bit.0: 1 bit1: 2 bits[205 BAUD RATE 00000001000200030004120024004800960019200This selects the RS-232C (EDL) transfer (baud) rate.[[ [208 PARITY000000010002NONODDEVENThis selects the RS-232C (EDL) parity.0: Parity bit is not used.1: Parity bit is used with odd parity.2: Parity bit is used with even parity.[FLOW CONTROL00000001NONERTSCTSThis selects the RS-232C (EDL) communication flow control.0: No flow control using RTS/CTS.1: Flow control using RTS/CTS.[271 EDL FORMAT00000001AGA850CMX340This selects the format in which the EDL is to be dumped.0: Format which is common with Panasonic’s AG-A850.1: Format which is common with the CMX340 editing system.[206 DATA LENGTH0000000178This selects the RS-232C (EDL) data length.0: 7 bits1: 8 bits[Item SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingVTR1VTR235Setup menusINTERFACE menu