Panasonic AJ-LT95 Operating Instructions Manual

Contents

Panasonic AJ-LT95 Operating Instructions Manual Manual pdf 33 page image

The underlining indicates the factory setting.[ [100 SEARCH ENA00000001DIALKEYThis selects the direct search operation.0: Direct search mode1: Non-direct search mode (search dial operations areacknowledged only in the STILL mode).102 FF. REW MAX000000010002x16x32x50This selects the maximum speed of fast forwarding and rewinding.0: 16 times normal speed1: 32 times normal speed2: 50 times normal speed101 SHTL MAX000000010002x8.4x16x32This selects the maximum speed in the shuttle mode.0: 84 times normal speed1: 16 times normal speed2: 32 times normal speed107 PLAY DELAY 0000000500150 (VTR1)5 (VTR2)15This selects the PLAY mode startup time in frame increments.When VTR1 and VTR2 are connected to external componentsand controlled from them, set the same PLAY DELAY value forthe whole system.[ [109 AUTO REW00000001OFFONThis selects the processing to be conducted when the tape endhas been detected.0: The tape is stopped when it comes to the end.1: The tape is rewound to its start.[ [103 AUDIO MUTE00000001OFFONThis selects the status to be established until the audio signals areoutput when the unit has transferred from the STOP mode orsearch mode to the PLAY mode.0: The time taken until the audio signals are output is reduced.1: The audio signals are output after the mode transfer has beencompleted.[ [106 EE MODE SEL00000001NORMALTHRUThis selects the output signals in the E-E mode.0: The signals, which have been delayed by the time taken toprocess them internally, are output.1: The signals are not internally processed and output in theiroriginal form without a delay.O“0: NORMAL” is forcibly selected when assemble or insertediting mode has been selected even with internal connections(INT mode) or even in the EXT/SEPARATE mode.OThe “THRU” mode is always set for VTR1.[[[ [108 CAP. LOCK000000014F8FThis selects the CAPSTAN LOCK mode when the SYNCHROswitch has been set to CF.0: 4F mode1: 8F modeIn the 525i mode, this setup menu item does not appear.[Item SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingVTR1VTR233Setup menusOPERATION menu