The underlining indicates the factory setting.[ [303 STD/NON-STD000000010002AUTOSTDN-STDThis selects the STD or NON-STD to match the composite inputsignals.0: The standard/non-standard signals are automatically identifiedand processed.1: The standard signals are processed. (Forced STD)2: The non-standard signals are processed. (Forced NON-STD)This operation is not performed in the 625i mode.304 SERVO REF00000001AUTOEXTThis selects the servo synchronizing signals.0: During recording or editing, the servo is synchronized with theinput signals; during playback, it is synchronized with the REFsignal.1: The servo is synchronized with the REF signal at all times.307 EDIT RPLCE300000001000200030000000100020003N-DEFCH1CH2CH1+2As with setup menu item No.305, this selects the VTR’s channel 3editing commands ON or OFF in accordance with the analogaudio signals specified by the controller.0: No setting1: Setting accords with the analog channel 1 editing commands.2: Setting accords with the analog channel 2 editing commands.3: Setting accords with the analog channel 1 or channel 2 editingcommands.This operation is not performed in the 625i mode.[305 EDIT RPLCE10000000100020003N-DEFCH1CH2CH1+2This selects the allocation of the channels using the controller’sanalog audio editing commands when a controller withoutfunctions for digital audio editing is used to edit the digital audiosignals of the VTR.The VTR’s channel 1 editing commands can be set ON or OFF inaccordance with the analog audio signals specified by thecontroller.0: No setting1: Setting accords with the analog channel 1 editing commands.2: Setting accords with the analog channel 2 editing commands.3: Setting accords with the analog channel 1 or channel 2 editingcommands.This operation is not performed in the 625i mode.[[ [306 EDIT RPLCE20000000100020003N-DEFCH1CH2CH1+2As with setup menu item No.305, this selects the VTR’s channel 2editing commands ON or OFF in accordance with the analogaudio signals specified by the controller.0: No setting1: Setting accords with the analog channel 1 editing commands.2: Setting accords with the analog channel 2 editing commands.3: Setting accords with the analog channel 1 or channel 2 editingcommands.This operation is not performed in the 625i mode.[308 EDIT RPLCE4N-DEFCH1CH2CH1+2As with setup menu item No.305, this selects the VTR’s channel 4editing commands ON or OFF in accordance with the analogaudio signals specified by the controller.0: No setting1: Setting accords with the analog channel 1 editing commands.2: Setting accords with the analog channel 2 editing commands.3: Setting accords with the analog channel 1 or channel 2 editingcommands.This operation is not performed in the 625i mode.[Item SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingVTR1VTR236Setup menusEDIT menu
