Panasonic AJ-LT95 Operating Instructions Manual

Contents

Panasonic AJ-LT95 Operating Instructions Manual Manual pdf 41 page image

The underlining indicates the factory setting.500 VITC BLANK00000001BLANKTHRUThis selects whether to output the VITC signal at the positionswhich have been set by setup menu item No.501 (VITC POS-1)and No.502 (VITC POS-2).0: The VITC signal is not output.1: The VITC signal is output.[ [503 TCG REGEN000000010002TC&UBTCUBThis selects the signal to be regenerated when the TCG (timecode generator) is in the regeneration mode.0: Both the time code and user’s bit are regenerated.1: Only the time code is regenerated.2: Only the user’s bit is regenerated.[ [504 REGEN MODE0000000100020003AS&INASSEMINSRTSWThis selects when the time code is to be regenerated duringautomatic editing (assemble editing or insert editing).0: The time code is regenerated in assemble editing or insertediting.1: The time code is regenerated in assemble editing.2: The time code is regenerated in insert editing.3: The time code regeneration accords with the REGEN/PRESETswitch position.[501 VITC POS-1(525i mode)00000006001010L16L20LThis selects the position where the VITC signal is inserted.The same line as the one selected by setup menu item No.502(VITC POS-2) cannot be set.[ [(625i mode) 0000000400157L11L22L502 VITC POS-2(525i mode)00000008001010L18L20LThis selects the position where the VITC signal is inserted.The same line as the one selected by setup menu item No.501(VITC POS-1) cannot be set.[ [(625i mode) 0000000600157L13L22LItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingVTR1VTR241Setup menusTIME CODE menu