Panasonic AJ-LT95 Operating Instructions Manual

Contents

Panasonic AJ-LT95 Operating Instructions Manual Manual pdf 49 page image

The underlining indicates the factory setting.770 CUE INSERT00000001OFFONThis selects whether to record signals onto the cue track in theaudio insert mode0: No signals are recorded on the cue track, and the alreadyrecorded signals are left on the track.1: Signals are recorded on the cue track.771 AUDIO SLOW000000010002PCMCUEA-CUEThis selects the audio output mode during slow playback.0: PCM modePCM sound is output at speeds from –0.43a to +1a, and thecue sound is output at all other speeds.1: CUE modePCM sound is output at the FWD 1a speed, and the cue soundis output at all other speeds.2: ALL CUE modeCue sound is output at all speeds including the FWD 1a speed.772 AUTO MONI00000001V1+V2AUTOThis selects the signal which is to be output to the speakers orheadphones.0: The signal complies with the AUDIO MONITOR SELECT switchsetting.1: The signals of the VTR selected by the VTR1/VTR2 button areoutput.In the VTR1/VTR2 simultaneous operation mode, the VTR1signals are output to the left channel and the VTR2 signals areoutput to the right channel.OThe setting is fixed at V1+V2 when the OPERATION MODEswitch is set to SEPARATE.OThe setting is fixed at V1+V2 when the CONTROL switch is setto REMOTE or EXT VTR.[[ [[773 PB AUDIO SEL00000001TR1/2TR3/4This selects the playback tracks when the ANALOG AUDIO OUTswitch is set to “V1•V2.”(This setting takes effect in the 50 Mbps mode.)0: The sound recorded on tracks 1 and 2 is played back.1: The sound recorded on tracks 3 and 4 is played back.[ [Item SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingVTR1VTR249Setup menusAUDIO menu