Panasonic AJ-LT95 Operating Instructions Manual

Contents

Panasonic AJ-LT95 Operating Instructions Manual Manual pdf 60 page image

60Split editing operationsWith insert editing, an audio IN point can be setslightly ahead of the video IN point. (Audio splitediting)Similarly, a video IN point can be set slightly ahead ofthe audio IN point. (Video split editing)Slightly ahead of the video IN point.(The audio IN point can also be placedbefore the video IN point.)Audio split editing (video reference)VTR1INpointAudio INpointVideo recordingAudio recordingOUTpointVTR2Slightly ahead of the audio IN point.(The video IN point can also be placed beforethe audio IN point.)Video split editing (audio reference)VTR1INpointVideo INpointVideo recordingAudio recordingOUTpointVTR2Split edit display lamp A SP or V SPSplit edit point setting display lamp1 For audio split editing (video reference), select“AUDIO” as the setup menu item No.375 (SPLITEDIT) setting; for video split editing (audioreference), select “VIDEO.”2 Turn on the video insert (V button).3 Select the channels into which the audio signalswill be inserted using the A1 button, A2 button, A3([SHIFT] + [A1]) button and A4 ([SHIFT] + [A2])button.5 Press the SPLIT button to light the LED above thebutton.6 Search the split IN point (audio IN point for audiosplit editing or video IN point for video split editing)in VTR1 or VTR2, and press the MARK IN buttonto set the point.The split edit point setting display lamp lights forthe VTR for which the split point was set, and the ASP or V SP lamp lights.7 Press the SPLIT button again.The LED above the SPLIT button now startsflashing to indicate that the split point has been set.When the DUR button is pressed while the LED abovethe SPLIT button is lighted, the split amount is shownon the counter display.9 Press the AUTO EDIT button to execute editing.(Alternatively, preview can be performed.)8 Set the OUT point of VTR1 or VTR2.(Alternatively, open-ended editing can beperformed.)4 Set the IN points of VTR1 and VTR2.With audio split editing, the video IN point is set;with video split editing, the audio IN point is set.The IN lamp of the edit point setting display lampslights.Steps 5, 6 and 7 can be skipped by pressing the[SHIFT] + [MARK IN] button after step 4.AVSPINOUTINOUT