Panasonic AJ-LT95 Operating Instructions Manual

Contents

Panasonic AJ-LT95 Operating Instructions Manual Manual pdf 85 page image

85Superimposed screenCharacters and symbols can be superimposed ontothe output signals from the unit’s liquid crystal monitoror VIDEO MONITOR OUT connector.This superimpose function can be turned ON or OFFby pressing the DISP ([SHIFT] + [0]) button.The information to be superimposed and displayedcan be selected using setup menu item No.002(DISPLAY SEL).$ TIME modeIn this mode, the counter value is displayed on oneline.TCR 12:34:56:21$ T&STA modeIn this mode, the counter value and VTR’soperating mode are displayed on two lines.TCR 12:34:56:21SHTL +32.0 R82$ T&S&STA modeIn this mode, the counter value, VTR’s operatingmode and remaining tape amount are displayed onthree lines.TCR 12:34:56:21SHTL +32.0 R82DVCPRO50Information displayed on MODE lineOTape formatThis displays the format of the cassette tape.Display example: DVCPRO 50OError messagesA warning message or the AUTO OFF message appears whenan error has occurred.For further details, refer to the error messages (pages 86, 87).Information displayed on TIME lineTTCCRR 1122::3344::5566::2211CTL: Control signalTCR: Time code reader valueT¢¢R: Time code reader value (when reading has failed)UBR: User’s bit value (no colon on counter when this isdisplayed)U¢¢B: User’s bit value (when reading has failed): (colon) = Normal mode. (period) = Time track mode: (colon) = Non-drop frame mode. (period) = Drop frame modeInformation displayed on STATUS (VTR’soperating mode) lineoo mm SSHHTTLL ++3322..00 RR8822VTR operationsEJECT, STOP, REW, FF, STANDBY OFF, PLAY, REC,EDIT, E PLAY, SHTL, JOG, VAR, PPLY, POWER OFF,AUTO OFF and DEWWhen the tape beginning or end has been detected,BOT (beginning of tape) or EOT (end of tape) isdisplayed at the head of the line.Display examples:OEOT STOP (STOP mode at the end of the tape)OBOT STANDBY OFF (STANDBY OFF mode at thebeginning of the tape)Search speed and directionOThe tape speed is displayed duringSHTL, VAR and PPLY.OThe direction is displayed during jog orEXT VTR control (REV, STILL, FWD).Remaining tape amountOIt appears when ON hasbeen selected as the setupmenu item No.003 (REMAINSEL) setting.OIt does not appear whenBOT or EOT is displayed(when the tape beginning orend has been detected)This appears when voice-over or audio cross channel editinghas been set.This appears when 20 seconds have elapsed after thecommencement of input audio data writing in the internal memoryin the course of a voice-over operation, and it indicates that thememory is now full.