Panasonic DMR-E60S Operating Instructions Manual

Also see for Diga DMR-E60: Firmware instructions Operating instructions Operating instructions

Contents

21RQT6981Playing back[RAM] [DVD-R]1 During playPress [TIME SLIP].2 Within 5 secondsPress [3, 4] to enter the time andthen press [ENTER].Press to alter in one-minute units. Press and hold to alter in10-minute units.[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]During playPress [6] or [5].≥Press and hold [D] or [E] on the main unit.[Note]≥The speed increases up to 5 steps.≥Press [1] (PLAY) to restart play.≥Audio is heard only while using first level fast forward (other thanCD, MP3). You can turn this audio off if you want to (➜page 45,Audio—PLAY k1.3 & Audio during Search).[RAM] (Only with Dolby Digital)You can increase the speed of play without disrupting thesoundtrack.During playPress and hold [1] (PLAY/ k1.3).To return to normal speedPress [1] (PLAY/k1.3).[Note]≥Output is in PCM when using a digital connection (➜page 51, [A]).≥This is canceled if you perform operations to change thesoundtrack, skip or pause.≥This does not work if the setting is “Off” in “PLAY k1.3 & Audioduring Search” (➜page 45).≥This does not work when recording is in XP or FR mode duringsimultaneous rec and play (➜page 23).You can mark positions by pressing [MARKER]. Also use on-screenmenus to mark, recall, and clear positions.[RAM] [DVD-R]Mark up to 999 positions. The unit records the markers directly ontothe disc and they remain intact even if you remove the disc.[DVD-A] [DVD-V] [VCD] [CD] [MP3]Mark up to 5 positions. The markers clear when you open the disctray.During playPress [MARKER].One marker is added.1 During playPress [DISPLAY].The on-screen menus appear.2 Press [3, 4] to select the “Play” andpress [1].e.g., DVD-RAM3 Press [3, 4] to select “Marker” andpress [1] to highlight the first aster-isk (¢).[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]4 Press [2, 1] to select an asterisk (¢)and press [ENTER].One marker is added.To recall a markerPress [2, 1] to select a marker number and press [ENTER].≥Play starts from the marked position.To clear markersPress [2, 1] to select a marker number and press [CANCEL].≥An asterisk replaces the number and the position is cleared.To clear the on-screen menusPress [RETURN].Selecting an amount of time to skip—Time SlipFast forward and rewind—SEARCHQuick View0 min–5 mine.g., Go back to 5 minutesL RPLAYDVD-RAML RPLAY t1.3DVD-RAMMarking places to play again—MARKERMarking positions directlyUsing on-screen menus to mark positionsWhen marking positions 11 and above[RAM] [DVD-R]1 Press [2, 1] to highlight “1–10”.2 Press [3, 4] to select “11–20”.You can select the next group of 10 when the current group isfull.3 Press [1].The first asterisk is highlighted.4 Press [ENTER] to mark a position.[Note]≥You cannot use this feature if:– the disc’s elapsed play time is not shown in the display.– you are using a play list. [RAM]– protection (cartridge ➜page 10, disc ➜page 38) is set (youcan still recall the markers to play a position). [RAM]≥Subtitles around markers may fail to appear.≥Markers are cleared when you finalize DVD-R (➜page 38).≥Markers on DVD-RAM and DVD-R are ordered by time, somarker numbers can change when you add and delete them.DiscVideoAudioOFF1s10 ††††††††††MarkerPlayRepeat play1s10 †††††††††† †††††1 21s10