Panasonic DMR-E60S Operating Instructions Manual

Also see for Diga DMR-E60: Firmware instructions Operating instructions Operating instructions

Contents

58RQT6981ReferenceTroubleshooting guideRecording and timer recording PageStill picturesThe precision parts in this unit are readily affected by the envi-ronment, especially temperature, humidity, and dust. Cigarettesmoke also can cause malfunction or breakdown.To clean this unit, wipe with a soft, dry cloth.≥Never use alcohol, paint thinner or benzine to clean this unit.≥Before using chemically treated cloth, read the instructions thatcame with the cloth carefully.Observe the following points to ensure continued listening andviewing pleasure.Dust and dirt may adhere to the unit’s lens over time, making itimpossible to record or play discs.Use the DVD-RAM/PD lens cleaner (LF-K123LCA1) about onceevery year, depending on frequency of use and the operating envi-ronment. Read the lens cleaner’s instructions carefully before use.Cannot record. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc theunit can record onto.≥The disc is unformatted. Format the disc so this unit can record on it. [RAM]≥The write-protect tab on the cartridge is set to PROTECT.≥Some programs have limitations on the number of times they can be recorded (CPRM).≥The disc is protected with DISC SETTING.≥The disc is full or nearly full. Erase unneeded programs or use another disc.≥You cannot record on finalized DVD-R discs.103810143832—VCR Plusr programmingdoes not work properly.≥The guide channels are incorrect. Go to the Channel menu and correct them with “VCRPlusi CH Setting”.≥The clock is wrong. Go to the Set Up menu and correct it with “Clock Settings”.847Timer recording does notwork properly.≥The timer program is incorrect. Correct the program.≥The unit is not on timer recording standby. (“F” on the unit’s display is not on.) Press [Í,DVD POWER] to turn the unit off and make sure that “F” is on.≥Different timer program times overlap.≥The clock is wrong. Go to the Set Up menu and correct it with “Clock Settings”.26——47The unit switches to standbywhile making a timer record-ing.≥The disc has run out of space. Use a disc that has enough space to record the program. —The timer program remainseven after recording finishes.≥The program remains if you select “DAILY” or “WEEKLY”. 25Timer recording does notstop even when [∫] ispressed.≥Press [∫] and then [ENTER] within 5 seconds to turn “F” off. Recording stops. —The available recording timedoesn’t increase even aftererasing recordings on thedisc.≥As this unit is unable to erase data written to DVD-RAM with a computer, the available record-ing time does not increase. The data will be erased if you reformat the disc.≥If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting.≥Available recording space on the DVD-R does not increase even after erasing previouslyrecorded programming.3854—A part or whole of a recordedprogram has been lost.≥If there is a power failure or the plug is disconnected from the household AC outlet whilerecording or editing, the program may be lost or the disc may become unusable.‹ We cannot offer any guarantee regarding lost programs or discs. You will have to formatthe disc or use a new disc.—The contents of the cardcannot be read.≥The memory card format is not compatible with the unit.‹ Format using FAT 12 or FAT 16 with other equipment or format the memory card with thisunit. (Mobile hard disc is also FAT 32 compatible.)≥The unit tried to display still picture files that were in a folder level that is not compatible.≥The still picture file is not JPEG or TIFF.‹ This unit displays still pictures (JPEG and TIFF) that are in accordance with DCF standard.≥Turn off and then turn on the unit again.361111—Copying, erasing and settingprotection takes a long time.≥When there are a lot of folders and files, it may sometimes take a few hours.≥When repeating copying or erasing, it may sometimes take a long time. Format the disc or memorycard.—36, 38The tray won’t open/close. ≥The tray cannot be opened or closed while the still pictures are played back and editing screenis being displayed. Press [RETURN] a few times to clear the screen.—The PC card cannot be removed. ≥Make sure the PC card is slotted home firmly before attempting to remove. 18Discs make sounds as they rotate. This does not indicate a malfunction.Maintenance