Panasonic DMR-E60S Operating Instructions Manual

Also see for Diga DMR-E60: Firmware instructions Operating instructions Operating instructions

Contents

37RQT6981Editing000100010001Press [2] toselect “Start” andpress [ENTER].Format begins.Once activated, materialcannot be returned to itsoriginal form. Checkcarefully beforeproceeding.Once activated, recordedcontents (including protectedstill pictures and computerdata) will be completely erased.Check carefully beforeproceeding.Press [3, 4, 2, 1] to select astill picture and press [ENTER].A check mark appears onthe still picture.≥ Repeat this if you erase more than one stillpicture.Press [3, 4, 2, 1]to select “Erase”and press [ENTER].A confirmation screenappears.Press [2] to select“Erase” and press[ENTER].Selected still pictures areerased, and the stillpicture select screenreappears.To select all the still pictures in the folderPress [3, 4, 2, 1] to select “Folder” and press [ENTER].(A check mark appears on the folder’s name; check marksinputted separately will be erased.)To change print (DPOF) settings1. Press [3, 4, 2, 1] to select “Whole” or a still picture with the DPOFmark and press [ENTER].2. Press [3, 4, 2, 1] to select “Set Up” and press [ENTER].3. Press [2, 1] to change the print setting≥ The print setting will be canceled if you set the number of print to “0”.4. Press [3, 4, 2, 1] to select “Set” and press [ENTER].To erase check marksPress [3, 4, 2, 1] to select the folder or still picture with the checkmark and press [ENTER].To select all the still pictures in the folderPress [3, 4, 2, 1] to select “Folder” and press [ENTER].(A check mark appears on the folder’s name; check marksinputted separately will be erased.)To erase check marksPress [3, 4, 2, 1] to select the folder or still picture with the checkmark and press [ENTER].To select all the still pictures in the folderPress [3, 4, 2, 1] to select “Whole” and press [ENTER].(A check mark appears on the folder’s name; check marksinputted separately will be erased.)Press [3, 4, 2, 1] to select a still picture andpress [ENTER].A check mark appears on the still picture.≥ Repeat this if you set protection of more than one still picture.Press [3, 4, 2, 1] toselect “Set Up” or“Cancel” and press[ENTER].Press [2] to select“Yes” and press[ENTER].The lock symbol appearson the still picture whenthe still picture isprotected.Press [3, 4, 2, 1] to select astill picture and press [ENTER].A check mark appears on thestill picture.≥ Repeat this if you print more than one stillpicture.Press [3, 4, 2, 1]to select “Set Up”and press [ENTER].Press [2, 1] toset number ofprint (0 to 9).Press [3, 4, 2, 1]to select “Set” andpress [ENTER].The DPOF markappears if you setone or morepictures to print.Press [2] toselect “Yes”and press[ENTER].Press [2, 1] toselect “SD card”or “PC card” andpress [ENTER].[Note] The memory cards formatted on this unitmay not be usable on other equipment.Press[ENTER]to completethe procedure.