35RQT6981Editing0001[Note]≥ “Picture” and “File” refer to numbers inside thefolder selected. Lower files are not included.≥ If there is more than one upper folder, pressing[:], [9] will switch between them (➜ page 11,Still picture folder structure).Press [2, 1] toselect “SD card” or“PC card”.Press [3, 4, 2, 1] to select “Allcopy” and press [ENTER].All still pictures are copied, and ALL COPYscreen reappears.[Note]Still pictures are copied but non-compatible files and folders will not copied.(➜ page 11).To select still pictures one by onePress [3, 4, 2, 1] to select a still picture and press[ENTER]. (A check mark appears on the still picture.)To select all the still pictures in the folderPress [3, 4, 2, 1] to select “Folder” and press [ENTER].(A check mark appears on the folder’s name; check marksinputted separately will be erased.)To erase check marksPress [3, 4, 2, 1] to select the folder or still picture with thecheck mark and press [ENTER].To select the copying driveWhile the confirmation screen is displayed1. Press [3, 4] to select “Destination” and press [ENTER].2. Press [2] and [3, 4] to select the drive.3. Press [1] and [3, 4] to select the folder and press [ENTER].≥ Some folders cannot be copied to [➜ page 11, Still picture folderstructure (indicated by §)].Press [3,4] toselect still picture’sfolder and press[ENTER].Press [2] and[3,4] to selectthe drive andpress [1].To enter the folder’s titleAfter selecting the still picture’s folder, press [1] to select “FolderTitle” and press [ENTER].(➜page 27, Entering text)≥ You can enter up to 36 characters.≥ Folder titles entered using this unit will only be displayed usingthis unit. Folders entered using this unit are written to theTITLE.DVD file.≥ If there is not enough space for the entry or if the limit for thenumber of files has been exceeded (➜page 11, Still pictures),the title cannot be entered.Select thecopyingdrive.(➜ below)Press [3, 4, 2, 1]to select “Copy”and press [ENTER].Copying of still picturesbegins.Press [3, 4, 2, 1]to select “Copy”and press [ENTER].A confirmation screenappears.Press [3, 4, 2, 1] to select afolder or still picture and press[ENTER]. (See below)A check mark appears onthe still picture.≥ Repeat this if you select more than onestill picture.