Panasonic DMR-E60S Operating Instructions Manual

Also see for Diga DMR-E60: Firmware instructions Operating instructions Operating instructions

Contents

33RQT6981Editing[Note]≥ The disc’s available recording time may not increase aftererasing short programs.≥ Computer data cannot be erased.≥ The available recording time on DVD-R does not increase whenyou erase programs.The lock symbolappears when theprogram is write-protected.Press [2] to setprotection and press[ENTER].[Note]≥ Use [6], [5] and slow-motion (➜ page 20) to find the start and end points.≥ Play pauses if the end of the program is reached during this procedure.≥ You may not be able to specify points within 3 seconds of each other.≥ You cannot specify an end point before a start point.≥ You cannot specify points on still pictures in the program.≥ The disc’s available recording time may not increase after erasing short segments.Repeat to enter other sections.Press [3, 4] toselect “Exit ” andpress [ENTER].Press [2] toselect “Erase ”and press[ENTER].Press [3, 4] to select “Next” and press [ENTER], then press [2] toselect “Erase” and press [ENTER].Press [2] to select“Divide” and press[ENTER].The program is divided.0:19 SPRemaining Recording TimeShorten SegmentCorresponding PLAY LIST will also be erased.Erase CancelRETURNENTERSELECTDIRECT NAVIGATORNo DATECH TIME EDITTITLE01 402 603 133311111ENTER0 ~ 9NoTOTAL 3 SELECTRETURNShortenSegment0 : 00 . 01Start– : – – . – –End3StartEndNextExit0 : 00 . 01PLAY03RETURNENTERSELECTNS0 : 00 . 01Start End3StartEndNextExit0 : 10 . 15RETURNENTERSELECT0 : 10 . 15NSShortenSegment033Divide ProgramDivide CancelRETURNENTERSELECTPress [2] toselect “Erase” andpress [ENTER].The program is erased.Press [ENTER] atthe end point of thesection you want toerase.Press [3, 4] toselect “Exit”and press[ENTER].Once you divide the program,it will not be restored to the original.[Note]≥ The divided programs retain the title and CPRM property (➜ page54) of the original program.≥ A minute portion of the recording directly preceding the divisionpoint may be lost.≥ It is not possible to carry out Divide Program in the following cases:–when the program is extremely short.–when the total number of programs is more than 99.To confirm the division pointPress [3, 4] to select “Preview” and press [ENTER]. (Play willbegin from a point 10 seconds prior to and after the divisionpoint.)To change the division pointPress [3, 4] to select “Divide” and press [ENTER] at the pointyou want to change.9 : 00 PM Auto action6/20 WED11 : 00 PM USJ6/20 WED6/20 WED 10 : 00 AM DinosaurPress [ENTER] atthe point you wantto divide theprogram.Press[ENTER] atthe start pointof the sectionyou want toerase.