Positioning Function (H type)10-7010.13 Operational Difference Between Speed Parameters10.13.1 Startup Speed• The startup speed is the parameter for setting the initial speed when starting each operationand the speed when finishing each operation.• The startup speed is common to each control of the JOG operation, home return, E-pointcontrol, P-point control, C-point control and J-point control operations. It is set for eachchannel number (axis number). Setting method of startup speedIt is set in the "Parameter settings" dialog box of Configurator PMX. Precautions when setting the startup speed• The home return creep speed setting is not influenced by the startup speed in the homereturn operation.• The target speed of each operation is not influenced by the startup speed. Each operation isperformed at each specified target speed regardless of the setting of startup speed.
