Pulse Output / PWM Output Function9-49.1.4 Configuration Using Tool SoftwareThe setting of the pulse output/PWM output function is specified in the configuration menu ofFPWIN GR7. Setting methodThe following procedure describes the process when the multi I/O unit has been alreadyallocated in the I/O map.PROCEDURE1. Select "Options" > "Multi I/O Unit Setting" in the menu bar.The "Mufti I/O Unit Setting" dialog box will be displayed. Select a unit to be used.2. Select "Pulse output" from the "Selection of function" tree, and double-clickan output number to which the pulse output/PWM output is allocated.The "Pulse output Advanced" dialog box will be displayed.3. Select a function setting, data update timing, and input a frequency.When selecting PWM output, set a duty ratio. Set the upper and lower limit valuesof the counter for the pulse output/PWM output according to applications.4. Select a pulse start logic.Select either "OFF start" or "ON start".
