7.2 UTILITY COMMANDS140 SYSTEM MAINTENANCE AND TROUBLESHOOTINGb. Press ENTER. Do not type a password on this screen.c. Press ENTER. Do not type a password on this screen.NoteThe password entered on the screen will not appear. The VPS does not distinguish thecapital letter from the small letter.7.2.4 Set Time (TIME)The TIME command is used to set the system date and time. A number of system functionsrequire that the system time and date be set correctly. These functions include message waitingnotification, external message delivery, call-retries-after initial-failure-to-connect, andautomatic deletion of messages.1. Type TIME, then Press RETURN.2. Type the current time.3. Type the current date. For the year, type the last 2 digits.NoteEnter the exact time and date. This command cannot be used when either the Systemor the Message Manager is accessing the time setting feature.7.2.5 Print Reports at Specified Time (PSET)This command is used to issue system usage reports (Disk Usage Report/Port Usage Report/Call Account Report) at a specified time each day by entering the PSET command. A printeror data terminal must be connected to the VPS at the RS-232C port for the reports to be printedor displayed.Maximum 8 charactersNEW PASSWORD : =VERIFICATION : =$ TIMECurrent time is 12:34, PMEnter new time (HH:MM, AM/PM) : =Current date is TUE AUG-3-1999Enter new date (MM-DD-YY) : =
