1.3 SYSTEM BASICSVOICE PROCESSING SYSTEM OVERVIEW 251.3.8 Expansion Capabilities for the KX-TVS100Expansion requires an additional Port card (KX-TVS102). Because each Port card has 2 ports,ports are increased in increments of 2. The KX-TVS100 can be expanded to 4 ports maximum(to handle 4 simultaneous calls).1.3.9 Expansion Capabilities for the KX-TVS200Expansion requires an additional Port card KX-TVS102 or 204. The KX-TVS102 card has 2ports. Ports are increased in increments of 2. The KX-TVS204 card has 4 DPT ports. Ports areincreased in increments of 4. This card can only be used on the KX-TVS200.1.3.10 Recommendations for System ConfigurationGeneral guideline: a ratio of 6/1 (for every 6 lines, 1 port). There are 2 questions to ask whenconsidering how many ports are desirable:• Are the ports answering all incoming calls or just forwarded/transferred calls?• If they are answering incoming calls, how busy are the lines?The guideline above (6/1) usually works well with moderate traffic. This may have to bemodified for heavy traffic. These recommendations are outlined in the chart on the next page.One port may not support an Automated Attendant configuration with 5 CO lines. Thefollowing recommendations for Automated Attendant ports may have to be modified for heavytraffic.Table 4KX-TVS200• 1 Hard Disk Drive• 3 Optional Port Card Slots for eitherKX-TVS102 or KX-TVS204 cards• 1 RS-232C Connector• 1 Rotary SwitchTable 5CO Lines Port1-6 17-12 2
