B2 SYSTEM ADMINISTRATION - MAILBOXESSYSTEM ADMINISTRATION 195B2 SYSTEM ADMINISTRATION - MAILBOXESUp to 62 (TVS75/100), 1022 (TVS200) Subscriber mailboxes can be created or edited byfollowing the correct sequence of steps.Editing MailboxesThe parameters of each mailbox can be edited based upon the needs of the Subscriber.To access the proper menu for mailbox setup, follow the menu path as shown:System Administration Top Menu - 1 - 1 - 1 - Maibox No.Table 4 1Parameter Value Range(Default)Description/FunctionMailboxNumber2-5 digits(None)Specifies the Subscriber's mailbox number. Mailbox numberlength is determined during setup or when initializing thesystem. Mailbox numbers cannot begin with zero. If thelength of the mailbox number has been defined as 3 digits, forexample, the valid range for all mailbox numbers would be100 through 997 (998 and 999 would be reserved for theMessage Manager and the System Manager). The length ofthe mailbox number cannot be changed through the MailboxSetting screen once it has been specified.To access the proper menu for mailbox editing, follow the menu path as shown:System Administration Top Menu - 1 - 1 - 1 - Mailbox No. - 1Table 4 2Parameter Value Range(Default)Description/FunctionThe Extensionof the Owner2-5 digits(None)Used to transfer calls through the VPS to a Subscriber'smailbox.Any valid extension number including an Extension GroupList number can be assigned.Note: If an Extension Group List number is assigned to amailbox, all group members are able to share the informationstored there.
