4.3 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURESINTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX 911. Enter Station Programming:a. With the phone on-hook, Press the PROGRAM button.b. Dial [99]. (Display changes to PITS-PGM Mode.)2. Press the code for the mode you want this phone to have.Hands-Free = 71Private = 72Screen output: Hands-Free or Private3. Press STORE.4. Exit the program mode by Pressing the PROGRAM button.5. Repeat these steps at each telephone.A single-line telephone that is connected to the same extension as a proprietary telephone canalso be used to monitor an incoming message. Be sure that Live Call Screening on theconnected proprietary telephone has been activated. This feature is useful when you are usinga cordless telephone. The handset sounds an alert tone to let you know that a message is beingrecorded. To intercept the call, flash the hook.4.3.4 Live Call Screening Button AssignmentFor the Live Call Screening feature to work at an extension, the extension must have an LCSbutton on it and the button must be lit at the time of the message. This key must be either aDSS/BLF or CO key (must have a lamp). Follow the procedure below to assign an LCS buttonon an extension. (This is a station level program and should be done at each individual phone.)1. Enter Station Programming:a. With the phone on-hook, Press the PROGRAM button.b. Dial [99]. (Display changes to PITS-PGM Mode.)2. Press the desired FLEXIBLE (CO or DSS/BLF) button you want to assign as the LCSbutton.3. Press [92].Screen output: LCS4. Press STORE.5. Repeat these steps at each telephone.6. To exit the Station Programming mode, Press the PROGRAM button or lift the handset.7. Repeat these steps for each telephone.Conditions: NoneConditions: This button must be assigned and lit for LCS to operate.To light this, press the button and Press the LCSpassword (see Password Assignment).
