7.2 UTILITY COMMANDS148 SYSTEM MAINTENANCE AND TROUBLESHOOTING7.2.12 Custom Service Menu Access Count Clear (CCLR)Each Custom Service has an access counter that counts the number times the service has beenaccessed. This command clears this counter.Type CCLR, Press Space, and Enter Custom Service Menu (1-100), then Press RETURN.NoteType CCLR 0 to clear the access counters of all Custom Services.7.2.13 Message Waiting Lamp Retry Times (MWL)This command is used to specify the number of times the VPS will attempt to turn on theMessage Waiting Lamp of the called extension. This setting is required when a PBX other thanthe Panasonic KX-T series telephone system is used.NoteThis setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes."Access: 3: Indicates that this Custom Service was accessed 3 timesby callers. This counter can be cleared, See7.2.12 Custom Service Menu Access Count Clear(CCLR).Menu Msg.:None:Indicates that the menu message for a Custom service is"None (not recorded)".[1]-Xfer Mbx(101):Indicates that the caller will be transferred to the mailbox101 by pressing [1]. If menu message is recorded, "Rec"will appear.[2]-Xfer Extn(102):Indicates that the caller will be transferred to theextension 102 by pressing [2].[3]-Custom [21]: Indicates that the caller will be sent to Custom Service 21by pressing [3].$ CCLR 20Custom Menu <20> Accessing Counter Cleared !!$ MWLCurrent Setting of M.W.L. Retry Count is 1Enter M.W.L. Retry Count (1-3) =
