5.1 STARTING UPCUSTOMIZING THE SYSTEM 995.1.3 Starting the Quick SetupQuick Setup is only available to the VT100 mode. The sequence must be followed through tothe end to take effect. If you press " \", you will have to start over. Quick setup may beperformed again without erasing prior data (for example, when adding a slave system).At the System Administration Top Menu, Type [5] and Press ENTER.Screen output:System Administration Top Menu 5Table 2 3PBX Type Required ProceduresKX-T308/T616 1 2 3 4 5 6 7 8KX-T123211D/TA series/T336/T96 *1*1 Not available in US1 3 4 5 6 7 8Non-Panasonic System 1 3 4 5 6 7 8KX-TD816/1232/500/308 1 4 5 6 8Quick Setup Utility for connection to Panasonic KX-T series telephone system.This utility provides a quick way of programming the Voice Processing System to operatein a standard automated attendant or Voice Mail configuration when connected to aPanasonic KX-T series telephone system. The system will prompt you to enter, modify orconfirm settings based upon which PBX type you select. By entering the appropriateinformation in the following screens, the system sets PBX integration parameters,identifies the extension numbers connected to it, creates default mailboxes, sets its ports tohandle callers with automated attendant or voice mail service, sets system passwords andsets the time and date. Finally, it confirms that you want to activate the system based on theinformation you entered, modified, or confirmed.To proceed, Press ENTER. To exit and cancel Quick Setup now, Press [\].
