MIB DescriptionsC-137612-A2-GB20-00 June 1997 snmpInTraps (snmp 19) snmpOutGetRequests (snmp 25) snmpOutGetNexts (snmp 26) snmpOutSetRequests (snmp 27)RS-232-Like MIB, RFC 1659Supported for the User Data port and the Terminal port. RFC 1659 is an SNMPv2MIB, but is converted to an SNMPv1 MIB to support this unit. This MIB consists ofone object and five tables. Number of RS-232-Like Ports Object. General Port Table Objects. Asynchronous Port Table Objects. Not supported for the User Data port. Synchronous Port Table Objects. Not supported for the Terminal port. Input Signal Table Objects. Not supported for the Terminal port. Output Signal Table Objects. Not supported for the Terminal port.Number of RS-232-Like Ports ObjectSupported as documented in the RFC.General Port Table ObjectsThe General Port Table Objects contains configuration options for theRS-232-Like interfaces. Clarification for objects contained in Table C-8 as itapplies to the unit is provided below.Table C-8. General Port Table Objects (1 of 2)Object Description Setting/Contentsrs232PortType(rs232PortEntry 2 )Identifies the port hardwaretype.Supports only the following values:rs232(2) – Identifies the Terminalport.v35(5) – Identifies the synchronousUser Data port which is compatiblewith the V.35 standard.rs232PortInSigNumber(rs232PortEntry 3 )Contains the number ofinput signals (in the inputsignal table) that can bedetected.The value is 2 for synchronous userdata port and 0 for the Terminal port.
