Using the ASCII Terminal Interface2-77612-A2-GB20-00 June 1997Switching to the Screen Function Key AreaSelecting Ctrl-a allows you to switch between the two screen work areas toperform all screen functions. ProcedureTo access the screen function area below the dotted line:1. Press Ctrl-a to switch from the screen area to the screen function key areabelow the dotted line. The available selections for the first input field appearon the last line as shown below.2. Select either the function’s designated (underlined) character or press the tabkey until you reach the desired function key.Example:To save the changes you have made on this screen, enter s or S (Save).3. Press Return. The function is performed.4. To return to the screen area above the dotted line, press Ctrl-a again.ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎmain/configuration/edit/termDevice Name: Node A Model: 7612TERMINAL PORT OPTIONSData Rate (Kbps): 9.6Character Length: 8Parity: NoneStop Bits: 1Monitor DTR: EnableLogin Required: EnablePort Access Level: Level 1Inactivity Timeout: EnableDisconnect Time(minutes): 5––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Ctrl-a to access these functions, ESC for previous menu MainMenu ExitSave
