Configuration Option TablesA-12 7612-A2-GB20-00June 1997Table A-5. Terminal Port Options (3 of 3)Inactivity TimeoutPossible Settings: Enable, DisableDefault Setting: DisableProvides automatic logoff of an ATI session through the Terminal Port. When thesession is closed, User Interface Idle appears on the screen and the unit toggles theTerminal port DSR lead.Enable – The ATI session terminates automatically after the Disconnect Time set in thenext option. When the session was occurring over an external modem connected to theTerminal port, the modem will interpret the DSR toggle as DTR being dropped anddisconnect.Disable – An ATI session through the Terminal port will remain active indefinitely.Disconnect Time(minutes)Possible Settings: range 1 – 60Default Setting: 5Number of minutes of inactivity before the ATI session terminates automatically.Timeout is based on no keyboard activity. Disconnect Time(minutes) option appears when Inactivity Timeout is enabled.1 to 60 – The ATI user session is closed after the selected number of minutes.Telnet Session OptionsFor Telnet Session Options, refer to Table A-6. To access the Telnet SessionOptions screen, follow this menu selection sequence:Main Menu →Configuration →Load Configuration From →Edit →Telnet SessionTable A-6. Telnet Session Options (1 of 2)Telnet SessionPossible Settings: Enable, DisableDefault Setting: DisableSpecifies if the DSU will respond to a Telnet session request from a Telnet client on aninterconnected IP network.Enable – Allows Telnet sessions between the unit and a Telnet client.Disable – No Telnet sessions allowed.
