Paradyne 7612 User Manual

Also see for 7612: Start-up instructions Start-up instructions

Contents

Paradyne 7612 User Manual Manual pdf 101 page image

MIB DescriptionsC-14 7612-A2-GB20-00June 1997Table C-8. General Port Table Objects (2 of 2)Object Setting/ContentsDescriptionrs232PortOutSigNumber(rs232PortEntry 4 )Contains the number ofoutput signals (in the outputsignal table) that can beasserted.The value is 3 for synchronous UserData port and 0 for the Terminal port.rs232PortInSpeed(rs232PortEntry 5 )Contains the port’s inputspeed in bits per second.Supports the following speeds forthe: User data port: 64,000, 62,400,60,000, 56,000, 54,400, 52,000,48,000.1 Terminal port: 2400, 4800,9600,14,400, 19,200, 28,800,38,400.rs232PortOutSpeed(rs232PortEntry 6 )Contains the port’s outputspeed in bits per second.The rs232PortOutSpeedobject has the same valuesas the rs232PortInSpeedobject.Supports the following speeds forthe: User data port: 64,000, 62,400,60,000, 56,000, 54,400, 52,000,48,000.1 Terminal port: 2400, 4800,9600,14,400, 19,200, 28,800,38,400.1 The User Data port speed is a read-only value that can only differ from the DDSnetwork speed if the In-band Management Channel is enabled.The following are not supported: rs232PortInFlowType(rs232PortEntry 7) rs232PortOutFlowType(rs232PortEntry 8)Asynchronous Port Table ObjectsThe Asynchronous Port Table contains an entry for the Management port whenthe port is configured for asynchronous operation and for the Terminal port. Forthis unit, entries in the table that are counters (rs232AsyncPortEntry 6–8) areused to collect statistics only and are not supported. Table C-9 shows theAsynchronous Port Table objects supported.Table C-9. Asynchronous Port Table Objects (1 of 2)Object Description Setting/Contentsrs232AsyncPortBits(rs232AsyncPortEntry 2 )Specifies the number of bitsin a character.Supports only the following values:7 – 7-bit characters8 – 8-bit charactersrs232AsyncPortStopBits(rs232AsyncPortEntry 3 )Specifies the number ofstop bits supported.Supports only the following values:one(1) – One stop bittwo(2) – Two stop bits