Testing7-37612-A2-GB20-00 June 1997Network TestsTo access the Network Tests screen, follow this menu selection sequence:Main Menu →Test →Network TestsÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎmain/test/networkDevice Name: Model: 7612NETWORK TESTSTest Command Status ResultCSU Loopback: Start Inactive 0:00:00DSU Loopback: Start Inactive 0:00:00Send V.54 Up: Send InactiveSend V.54 Down: Send InactiveSend 511: Start Inactive 0:00:00Monitor 511: Stop Active 125:08:48 Errors 99999+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Ctrl-a to access these functions, ESC for previous menu MainMenu ExitResetMonUse the Command column to start or stop a test by pressing Enter. The Resultcolumn displays the test duration since the last device reset. When the Monitor511 test is active, ResetMon is available to reset the error counter to zero.A network-initiated loopback is not affected by the Test Timeout option, the Stopcommand on the Network Test screen, or the Abort All Tests command from theTest menu.CSU or External Network LoopbackCSU loopback is an external loopback that is located as close as possible to thenetwork interface. An active CSU loopback disrupts IP data going over the IMC.DSU CSUDTEInterface AggregateDTEPortDDSNetworkPort496-15144CSU Loopback
