Standards Compliance for SNMP TrapsD-37612-A2-GB20-00 June 1997Traps: enterpriseSpecificThe enterpriseSpecific trap indicates that an enterprise-specific event hasoccurred. The Specific-trap field in the Trap PDU identifies the particular trap thatoccurred. The following table lists the enterprise specific traps supported by theunit:Trap What It Indicates Possible CauseenterpriseSelfTestFail(2) A hardware failure of the unitis detected during the unit’sself-test. The trap isgenerated after the unitcompletes initialization.There are novariable-bindings.Failure of one or more ofthe unit’s hardwarecomponents.enterpriseDeviceFail(3) An internal device failure.There are novariable-bindings.Operating software hasdetected an internal devicefailure.enterpriseTestStart(5) A test is running. At least one test has beenstarted on an interface.enterpriseConfigChange(6) The configuration changedvia the user interface or anSNMP manager. The trap issent after 60 seconds haveelapsed without anotherchange. This suppresses thesending of numerous trapswhen multiple changes aremade in a short period oftime, as is typically the casewhen changing configurationoptions.There are novariable-bindings.Configuration has beenchanged via the userinterface or an SNMPmanager.enterpriseTestStop(105) All tests have been halted. All tests have been haltedon an interface.
