Using the ASCII Terminal Interface2-57612-A2-GB20-00 June 1997Navigating the ScreensYou can navigate the screens by: Using keyboard keys Using screen function keys Switching between the two screen work areasKeyboard KeysUse the following keyboard keys to navigate within the screen.To . . . Press . . .Move cursor between the screen area and the screen functionkeys area below the dotted line at the bottom of the screenCtrl-aReturn to the previous screen EscMove cursor to the next field on the screen TabAccept entry or display valid options on the last row of the screenwhen pressed before entering data or after entering invalid dataReturn (Enter)Move cursor one position to the left Ctrl-kSelect the next valid value for the field SpacebarDelete character that the cursor is on Delete (Del)Move cursor up one field within a column on the same screen Up Arrow or Ctrl-uMove cursor down one field within a column on the same screen Down Arrow or Ctrl-dMove cursor one character to the right if in edit mode Right Arrow or Ctrl-fMove cursor one character to the left if in edit mode Left Arrow or Ctrl-bRedraw the screen display, clearing information typed in but notyet enteredCtrl-l ProcedureTo make a menu or field selection:1. Press the tab key or the arrow keys to position the cursor on a menu or fieldselection. Each selection is highlighted as you press the key to move thecursor from position to position.2. Press Return. The selected menu or screen appears.3. Continue Steps 1 and 2 until you reach the screen you want.
