MIB DescriptionsC-12 7612-A2-GB20-00June 1997ICMP GroupThe ICMP (Internet Control Management Protocol) Group objects are fullysupported.TCP GroupThe TCP Group objects are fully supported, with the exception of tcpConnStateobject, which will be read-only, since deleteTCB (12) is not supported and is theonly value which can be set.UDP GroupThe UDP Group objects are fully supported.Transmission GroupObjects in the Transmission Group are supported on the DDS network interface,User Data port, Ethernet port, and Terminal port. These objects are definedthrough other Internet-standard MIB definitions rather than within MIB II.Table C-7 shows how Transmission Group objects are supported.Table C-7. Transmission Group ObjectsObject Descriptiondot3(transmission 7)Supported on the Ethernet port. Defined by the Ethernet-likeMIB (RFC 1643).rs232( transmission 33 )Supported on the User Data port and Terminal port. Defined bythe RS-232-like MIB (RFC 1659).enterprise(transmission 22 )Supported on the DDS network interface by ParadyneEnterprise MIB.SNMP GroupThe SNMP Group objects that apply to a management agent are fully supported.The following objects apply only to an NMS and return a zero value if accessed. snmpInTooBig (snmp 8) snmpInNoSuchNames (snmp 9) snmpInBadValues (snmp 10) snmpInReadOnlys (snmp 11) snmpInGenErrs (snmp 12) snmpInGetResponses (snmp 18)
