MIB DescriptionsC-6 7612-A2-GB20-00June 1997Table C-2. Interfaces Group Objects (4 of 4)Object Setting/ContentsDescriptionifOutOctets(ifEntry 16)Collects outputstatistics on datareceived by theAn integer number.ifOutUcastPkts(ifEntry 17)received by theinterface.Applies to the IMC andifOutDiscards(ifEntry 19)Applies to the IMC andthe Ethernet port.Statistics are notcollected if theifOutErrors(ifEntry 20)collected if theEthernet port isdisabled.Extension to Interface Table (ifXTable)This extension contains additional objects for the Interface table. Table C-3 showsthe objects supported.Table C-3. Extension to Interface Table (ifXTable)Object Description Setting/ContentsifName(ifXEntry 1)Provides name of theinterface.Interface text strings: Ethernet Port Terminal Port DDS Network User Data Port In-band Management ChannelifLinkUpDown-TrapEnable(ifXEntry 14)Indicates whether the link isup or down, or enterprise-specific traps should begenerated.Only supports DDS network and Userdata port.SNMP Traps must be enabled for theunit. See SNMP Traps Option,Table A-9.ifHighSpeed(ifXEntry 15)Reflects the ifSpeed settingfor the interface.This object is supported as read-only.ifConnector-Present(ifXEntry 17)Indicates whether there is aphysical connector for theinterface.true(1) – Will always have this value forthe DDS network, Ethernet port,Terminal port, and User Data port.false(2) –Will always have this value forthe In-band Management Channel.
