134 2 0 0 0 - A 2 - G B 2 3 - 0 0Display DHCP Entry DetailsType “D” on the DHCP Server Configuration menu to display DHCP entrydetails. The IAD displays the following information about the DHCP entries:For the IAD to display this information, you must attach DHCP Clientdevices that use DHCP to obtain an IP address from the IAD.Delete a DHCP Client EntryTo delete a DHCP Client Entry, follow the steps below.1 Type “X” on the DHCP Server Configuration menu to delete a DHCPclient entry.2 Type the number of the client entry to delete and press Enter. The IADdeletes the client entry from the table and saves the new configuration.Delete a DHCP Assignment EntryTo delete a DHCP Assignment Entry, follow the steps below.1 Type “Y” on the DHCP Server Configuration menu to delete a DHCPAssignment Entry. The IAD prompts you for the DHCP entry index numberto delete.2 Type the index number to delete and press Enter.The IAD deletes theassigned IP address from the Display DHCP Server Assigned Addressescommand and saves the new configuration.Multicast ConfigurationMulticast (point-to-multipoint) is a communication feature that allows asource host to send a message to a group of destination hosts. Multicastingreduces traffic on the local network by sending only one (multicast) packetout to a higher-bandwidth relay point.Value DescriptionIP address IP address of the device.Client ID Ethernet MAC address for the device.Status how the IP address is assigned to the device—via DHCP server, ormanually.Subnet IP subnet mask; number of bits reserved for host ID.Gateway IP address of packets sent to destination.DNS P address of the DNS server.Lease length of time to keep the Internet connection active.Type type of IP address: static or dynamic.Name name of the device.