C o n f i g u r a t i o n 53Display SDSL AutoCycle Speed TableType “P” on the SDSL Configuration menu (Figure 4.8) to display the SDSLAuto Cycle Speed Table as shown in below.Figure 4.10 SDSL Auto Cycle Speed TableQuick ConfigurationNOTICE: The Quick Configuration menu is designed to easily configurepredefined settings for specified DSLAMs.The 2000 Series contains a number of predefined configurations for physicalconnections and PVCs.To use one of the predefined configurations, follow the steps below.1 On the WAN Configuration Menu (Figure 4.4), type “5” to display theQuick Configuration menu.Figure 4.11 Quick Configuration Menu