A d m i n i s t r a t i o n 23C H A P T E RCHAPTER 3ADMINISTRATIONThis chapter describes how to control security to your IAD, validate usersusing a RADIUS Server, configure SNMP via IP or AAL2 EmbeddedOperations Channel (EOC), upgrade IAD software, and perform other generaland utility-oriented tasks.NOTICE: When the IAD prompts you for input, the current value is displayed inparentheses. To conveniently accept the current value, just press Enter.IAD SecurityNOTICE: After setting IAD Security parameters, you must reset the IAD(page 2-18) for the new settings to take effect.To maintain IAD security, the IAD provides multi-level login access using asingle user ID and password, which you can set at the following levels:• User• Network Administrator• SupervisorThe user ID at the User security level may be modified, but the user ID at theNetwork Administrator and Supervisor levels may not.The password for each security level may be changed. Although you may usethe same password for all security levels, Paradyne recommends that you usea different one for each level. The table below lists the privileges available ateach security level.
