76 2 0 0 0 - A 2 - G B 2 3 - 0 02 Type the port number corresponding to the DLCI you want to delete. Topermanently remove the DLCI configuration, type “Y”. To cancel theoperation, type “N”.Show Current DLCIs To display all currently configured DLCIs, follow the steps below.1 Type “4” on the Frame Relay DLCI Configuration menu to display the porttable.2 Press any key to display the Frame Relay DLCI Configuration menu.Configure Frame Relay OptionsTo configure Frame Relay options, type “4” on the WAN Configurationmenu. The IAD displays the Frame Relay menu (Figure 4.44).Figure 4.44 Frame Relay Options Configuration MenuEach of the menu options is described in detail below.Configure Fragmentation1 On the Frame Relay Options menu, type “1” to display the Frame RelayFragmentation Configuration menu (Figure 4.45).Figure 4.45 Frame Relay Fragmentation Configuration Menu2 Type “1” to select Configure FRF.12 Fragmentation and proceed toFRF.12 configuration.− or −Type “2” to select Copper Mountain Fragmentation and proceed toCopperMountain Fragmentation configuration.Each of these configurations is described below.Frame Relay FRF.12ConfigurationSelect FRF.12 Fragmentation to display the FRF.12 Configuration menu(Figure 4.46).
